HY-70/80 3 Station Plastic Thermoforming Machine

（BOPS/PET/PS/PVC）

The Machine (Forming Area 700×800mm) has three separate stations: forming, punching and stacking. It’s specially made for high-transparency thin-wall packaging with BOPS and PET sheets, with key advantages of material saving, energy saving and stable production. It can produce a wide range of products, like hanged container, clamshell, bakery box, egg tray, paper bowl lid and so on, optimizing production efficiency.

If you have below requests on machine:

Save power;
Save material;
Lower mold cost;
Good for OPS products;
Stable product quality;
Wide usage;

Lower Power Loss, Choose HY-70/80

Traditional ceramic heater consume excessive power and cause over heating of BOPS/PET products.

HY-70/80 features a dual heating system: heating A zone and in-mold heating B zone, flexible mode switching satisfied varied heating demands of BOPS and PET materials.
Replacing conventional ceramic tile heaters with heating plates,which fits closely to mold with fast heat transfer and zoned temperature control to cut heat loss, power consumes lower to 15-20kw/h.
Delivers consistent heating to guarantee superior material transparency and complete product forming.

Cut Material Waste, Choose HY-70/80

Compared with conventional chain feeding, HY-51/62 saves 25% materials and has 94% BOPS and PET utilization.

Optimized mold layout by reduced gap, saving 10-15% materials than peers;
Chain-free feeding minimizes trim waste and cuts material cost by 10%.

Reduce Mold Cost, Choose HY-70/80

High mold cost on small orders? Retain new clients with affordable HY-70/80 optimized wooden molds.

Wood cutters cost less than aluminum alternatives for thin wall products.
Laser-cut blades are easy to maintain for customers.
Premium wood-based panels with moisture-proof treatment for long-lasting durability.

Worried chain-free feeding not stable enough?

HY-70/80 is equipped with a stable sheet feeding system, which maximizes material utilization.

Driven by a servo motor, the sheet feeding is constant and controllable.
Equipped with 3 sets of clamps: 2 sets clamps firmly hold the material sheet to prevent it from falling down, and 1 set move sheet forward together.
Multi-sets guiding roller holds material sheet forward strongly.

Specifications

Machine model	HY-70/80
Forming area	700×800mm
Forming depth	120mm
Suitable material	BOPS/PET/HIPS/PVC
Sheet thickness range	0.10-1mm
Max. Cutting strength	70 Tons
Production speed	15-22cycles/hour
Total heating power	A zone 20kw/ B zone 36kw
Power consumption	15-22 kw/h
Power supply	AC380±15V 50HZ
Max. Material roll diameter	1000mm
Machine weight	10000kg
Machine dimensions	Main machine (LWH)	767017052830mm
	Material feeder (LWH)	144013231306mm

HY-70/80 Support Material

Our HY-70/80 machine can stably process BOPS, PET, HIPS, PVC thermoforming sheets. You can clearly see what you’ll be able to produce after choosing our HY-70/80 by below sample pictures.

BOPS（Biaxially Oriented Polystyrene）

OPS features high rigidity and light weight. It uses less material than PET and is easier to mold than PP. It is suitable for food packaging requiring clear display, such as bakery cake clamshell, cookie tray, lids covers and vegetable containers.

PET （Polyethylene Terephthalate）

PET(APET/R-PET) features high transparency, good low-temperature resistance, non-toxic and odorless, safe for food contact, environmentally friendly and recyclable. It is suitable for packaging container for bakery pastries, fresh food, fruits, vegetables, cold drinks and other products.

HIPS（High Impact Polystyrene）

HIPS features good toughness, easy processing and low cost, and can be anti-static, suitable for structural support packaging such as electronics, hardware, toys liners and lids covers.

PVC（Polyvinyl Chloride）

PVC features good flexibility, easy forming, low cost and strong protection, suitable for blister and folding boxes for stationery, toys, hardware, cosmetics and other non-food products.

Video of one station thermoforming machine

This 3-station thermoforming machine comes with three separate stations for forming, punching and stacking. It guarantees stable sheet feeding and consistent high product quality. The operation is simple and can be easily handled by a single operator, effectively improving production efficiency and lowering costs.

Advantage

Servo System

Japan Yaskawa servos for smooth running with low noise.

Material Loading

Sheet lifting and lowering driven by air cylinder to save labor.

Heating Zone

Heating zone softens thick sheets for better feeding and forming effect, enhances production capacity.

High Precise Cutting

Heating-forming-cutting in one station for high precision cutting.

Save Labor

Auto stacking robot with lightweight aluminum suction rods reduces manual handling, improves productivity.

Buyer Show

Widely popular in mainstream BOPS markets including Thailand and Taiwan.Tailor-made for local hot-selling 104-size BOPS clamshell boxes.Massively adopted by top manufacturers EPP, MT, CAW with stable and market-proven performance

Why AMTOP? Best Factory Support Service

VERY IMPORTANT! After-sales support matters greatly when buying a thermoforming machine.
1. Pre-sales Customized Matching Solution
Offer professional line matching suggestions based on your production demands, product specifications and factory layout, to select the most suitable equipment.
2. In-sales Transparent Progress Follow-up
Confirm detailed equipment drawings and parameters strictly. Update real-time production and assembly progress for full transparency.
3. Strict Pre-delivery Inspection & Acceptance
Complete full equipment debugging and strict quality inspection before shipment, with detailed test records to guarantee qualified factory output and ready-to-run production.
4. Efficient After-sales Technical Support
Provide on-site installation & commissioning services, plus 24/7 online remote support to solve operational problems quickly and minimize downtime loss.